Mordaunt-short MS909W Bedienungsanleitung PDF herunterladen (Seite 9)

Getting SStaarrted

Attaching FFeet tto yyour SSubwoofer

Your MS909W subwoofer comes with feet and spikes

which must be fitted to space the down-firing speaker unit

the correct distance from the floor for optimum operation.

The spikes attach to the bottom of the feet (as shown below

left).

There are eight pilot holes on the bottom of the speakers.

The feet are located and secured here with the wood screws

supplied (below right). Level as required.

Running IIn

Your new unit will require a total of approximately 10 hours

of normal use to allow the components to settle into their

working routine and reach their optimum performance.

Connecting vvia LLine IInput

If your amplification system has a dedicated subwoofer line

output then you should connect your MS909W via the Line

Input on the rear panel using a good quality phono lead.

Note that if your amplification system has a mono

subwoofer line out then use the ‘L’ socket on your

MS909W.

Connecting vvia HHigh LLevel CConnections

Do not compromise the performance of your system by

using inferior quality cables! Mordaunt-Short recommends

that high quality cables of 16 gauge or higher be used. Your

professional dealer will give you good advice.

Observing polarity is of the utmost importance while

connecting your loudspeakers. Ensure that the red (+)

terminals on your amplification system are connected to the

red (+) on the subwoofer, and black (-) on your amplification

system to black (-) on your subwoofer.

Important NNote:

Always unplug all A.C. powered

components before making any loudspeaker or component

connections. This will avoid the risk of electric shock or

damage to your equipment

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Mordaunt-short MS909W Bedienungsanleitung Seite 9